Mounting; Setting; Memory Card; Replacing The Memory Card - DELTA DORE Tycam 1100 Guide D'installation

6.3 Mounting

- Drill the mounting holes using the drill template.
- Mount the base with suitable screws for the support.

6.4 Setting

- Loosen nut A,
- Point the camera correctly
then tighten nut.
For installations that require wiring for outdoor sockets,
a external connection box is available as an option.
BRE Tycam 2100 Outdoor - Ref: 6417008

6.5 Memory card

The Tycam 2100 Outdoor camera is
already fitted with a memory card.
This card records encrypted videos that can
only be read by the Tydom application. You can
increase the recording capacity by installing a
card with a greater capacity (Micro SD/ SD HC/
SD HX classe 10 obligatoire).
Note: Videos recorded on another card
model will not be encrypted.

6.6 Replacing the memory card

- Turn off the camera power supply.
- Remove the 2 screws from the cover
using the key supplied.
- Insert the new memory card
in the direction indicated.
- Format the card using the Tydom
application.
0°/360°
A
0°/90°
Memory
card
8 GB
16 GB
32 GB
64 GB
128 GB
Drill Template
0°/360°
Continuous
recording time
12h
24h
2,5 days
5 days
10 days
RESET / WPS
Memory card
location
EN
25