Wall Cabinet; Wall Mounting - Gladiator CADET Série Instructions D'assemblage

A
1.
Position shelves at desired location and secure with
4 screws each through pegboard sides.
1
2.
The hardware used to secure the cabinet may vary depending on the
type of wall and spacing of wall supports. Please contact your local
hardware retailer for fastening hardware.
These instructions provide a general guideline for hanging the cabinet.
Fastening hardware is included for wood frame wall construction.
The cabinet should be mounted flush and level on the wall. You must
use the top 2 mounting holes when securing the cabinet to the wall.
We recommend using 4 mounting holes to secure the cabinet.
TIP: A securely fastened cleat (A) mounted level and at the appropriate
height will aid in mounting the cabinet.
2
Maximum Weight Limits
CADET-1250
Shelves: 40 lbs. (18 KG) each
Cabinet: 150 lbs. (67 KG) total

Wall Cabinet

INSTRUCTIONS
CADET-1250
Excessive Weight Hazard
Use two or more people to
move and assemble cabinet.
Failure to do so can result in
back or other injury.

Wall Mounting

WARNING
40192-1004
3 16