Attaching And Connecting The Elements - SCS SOFIA M7E8-SU Manuel D'installation Et D'utilisation

ATTACHING AND CONNECTING THE ELEMENTS

Attaching
1) Attach the rear support of the monitor (at a height of 1.5 metres on a flat wall).
2) Connect the wires and insert the monitor onto its support.
WIRE SECTION :
B1/B2 : From 0 to 50 metres: use the 0.75 m² cable
18V / GND : use RVV2 *1mm² cable.
CABLING DIAGRAM :
1
Monitor 1 / Monitor 2
A1 A2 B1 B2 C1 C2 GND VD
18 Volt
adaptor
B1
B2
XOE8 SUB
ENGLISH
2
E8 monitor
3