Operation; Energy Saving Tips; Selecting The Temperature - Dometic GROUP WAECO CoolFun CD-30 Notice D'emploi

CD-30.book Seite 19 Donnerstag, 14. Oktober 2010 5:53 17
CD-30
7

Operation

Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the "Cleaning and care" chapter on
page 20).
7.1

Energy saving tips

Choose a well ventilated installation location which is protected against
direct sunlight.
Allow food to cool down first before placing it in the device.
Defrost your cooling device as soon as a layer of ice forms.
Avoid unnecessarily low temperatures.
Do not open the cooling device more often than necessary.
Do not leave the device open longer than necessary.
Clean the condenser of dirt (dust etc.) at regular intervals.
7.2 Switching on the coolbox
➤ Open the coolbox drawer.
➤ To switch on the coolbox, turn the thermostat knob clockwise
(see fig. 2 A, page 2).
✓ The coolbox starts cooling the interior.
Ensure that the objects placed in the coolbox are suitable for
cooling/warming to the selected temperature.
7.3

Selecting the temperature

The switch on the thermostat (see fig. 2, page 2) displays the selected
temperature.
Switch position
MAX
MIN
Temperature range
(independent of ambient temperature)
approx. -2 °C in interior
approx. +12 °C in interior
Operation
19