Night Mode - Bresser MyTime Echo Mode D'emploi

4. Press and hold MODE button again for approx. 3
seconds to deactivate the automatic display change.

14 Night mode

1. In Night mode, the display brightness is automatically
reduced at the time you specify.
2. Press the MODE button 2x to enter the night mode set-
tings.
3. Press UP or DOWN button to activate or deactivate.
4. Immediately after activation, press and hold the MODE
button for approx. 3 seconds to change the interval (de-
fault interval: 6 p.m. to 6 a.m.).
15 Display brightness regulation
• Press the UP button to adjust the brightness of the LED
display in 2 steps.
16 Disposal
Dispose of the packaging materials properly, accord-
ing to their type, such as paper or cardboard. Contact
your local waste-disposal service or environmental au-
thority for information on the proper disposal.
Do not dispose of electronic devices in the household
garbage!
According to the European Directive 2012/19/EU on
Waste Electrical and Electronic Equipment and its
transposition into national law, used electrical equip-
ment must be collected separately and recycled in an
environmentally sound manner.
15 / 56