Alarm Setting; Temperature Display - Bresser MyTime Echo Mode D'emploi

5.
6.

12 Alarm setting

1.
2.
3.
4.
5.
6.
7.

13 Temperature display

1.
2.
3.
14 / 56
Settings order: Hour > Minute > 12/24 hour time mode
Finally press the MODE button to save the settings and
exit the setting mode.
Press and hold ALARM button for approx. 3 seconds to
enter the alarm time setting mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press ALARM button to confirm and continue to the
next setting.
SeSettings order: Hours > Minutes > Snooze interval
(05-60 minutes)
Finally press the ALARM button to save the settings
and exit the setting mode. Alarm will be activated auto-
matically. The symbol "AL" will be displayed.
In normal display mode, press the ALARM button to ac-
tivate or deactivate the ALARM. The symbol "AL" will
be displayed.
Press the MODE button once, to enter the temperature
display settings.
Press DOWN button to switch between °C and °F.
Press and hold MODE button for approx. 3 seconds,
until you hear the signal sound, to activate the auto-
matic display change of Temperature (5 seconds) >
Time (10 seconds).