Water Tech PRECISION 2.0Li Manuel De L'opérateur page 8

English
P50X006
P50X006G
P41X200
P50X002
P50022XF
Specifications
Battery charger Input.........................................................................110-240V-50/60HZ, 0.3A Maximum
Battery charger Output.......................................................................................................12.6V,
Water temperature range................................................... Maximum 96°F, (35°C) Minimum 40°F, (5°C)
Operation Depth........................................................... Maximum 12 ft. (3.5 m), Minimum 10 in., 0.25 m
Charge temperature.....................................................Maximum 100°F, (37.7°C) Minimum 50°F, (10°C)
Only use the battery charger supplied with the cleaner.
A
Charging Your Cleaner
Initial Charge 4 Hours
Recharging (After Complete Discharge) 4 Hours
Maximum charging time should not exceed 24 Hours
B
Adding the Brushes
C
Filter Assembly
D
Attaching the Vacuum Head
(Figure D.1 without adapter)
(Figure D.2 with adapter)
Brushes
• Brushes are added to the vacuum head.
(Figure B)
• Different configurations are available.
(6 Brushes Total)
Return non-working electrical equipment to a facility appointed by your municipality that properly recycles electrical and electronic equipment.
Do not dispose them in unsorted waste bins. For items containing removable batteries, remove batteries before disposing of the product.
1. Vacuum Head (Brushes)
2. Brushes
3. Wheels
4. Vacuum Head
5. Universal Vac Head Adapter
6. Nose Cap
7. Multi Layer filter bag
8. Shell
Environmental Program(s), WEEE European Directive
Please respect the European Union regulations and help to protect the environment.
LC099-3S6-US-EU
LB003S2P-C
P40X003
P50022SS
P50022AP
PROW070
LC099-3S-CR
1.A
Head and Hose Attachment (part No: P30X882)
To purchase, contact your retailer or call us at (732)-967-9888
E
Attaching the Pool Pole
F
Turning the Cleaner On and Off
G
Maintenance
Long Term Storage
• Remove the Battery Pack from the cleaner before storage.
• Always clean the Nose Cap and Filter Bag before storing.
• Always store and charge your cleaner in a cool, dry indoor shelter.
• Recharge the cleaner for 4 hours after each month of inactivity.
• Never leave your charger connected to the cleaner for more
than 24 hours.
Cleaning the Filter Bag
• You should remove and clean the Filter Bag following each use.
(Figure G.1)
• Don't scrub the bag against itself while rinsing it.
(Figure G.2)
Help protect the environment.
9. Battery Charger & EU Adapter
10. Spring Clip
11. Battery Pack
12. Motor Box Assembly with Cap
13. Sand and Silt Bag
14. All Purpose Filter Bag
15. Shoulder Strap
16. Car Charger
ADDITIONAL PARTS AVAILABLE:
Environmental Recycling Programs USA
7