GB
FILTERS
Turn the appliance off and remove the plug from the outlet.
A
Opening: at the A recesses, pull the
front part up. The front part will stay
horizontal (turn up 90 °).
1. Hold the front part open (or put it in horizontal position) and remove the
filter(s).
2. Tap the filter gently or use a vacuum cleaner to remove dirt. If the dust filter
is very dirty, it may be washed in lukewarm water with a very small amount of
neutral detergent. Rinse well and allow to dry completely (not in direct sunlight or
near a source of heat).
3. Keep the grid panel open and reinstall the filter(s). Press the panel shut; a click
indicates it is closed properly.
4. Plug the appliance back in and turn it on.
44
B
A
Closing: press the front part down at
the sides at B and in the middle at C.
Make sure it is properly closed (click).
B
C