Amcoraire HWAM9KE Mode D'emploi Et Manuel D'installation page 42

GB
Sleep mode
1. Press the mode button
appears.
2. Set the desired temperature.
3. Press the sleep mode button
the sleep mode by pressing this button again.
4. The fan speed is low in sleep mode.
Auto mode
1. Press the mode button
2. The difference between set temperature and room temperature determines how
the appliance operates: cool, heat, fan or dry. The up and down buttons will not
work.
3. Use the fan button
Timer off function
1. Press the mode button
2. Set the desired temperature.
3. Use the fan button
4. Press the timer off button
the down button for minutes. Once the time you have set has elapsed, the
appliance will switch itself off. To cancel the timer off function before the set time
has elapsed, press the timer off button
Timer on function
1. The appliance is switched off.
2. Press the timer on button
the down button for minutes.
Set the desired operation, temperature, fan speed, etc. Once the set time has
elapsed, the appliance will switch itself on. To turn off the timer on function
before the set time has elapsed, press the timer on button
Turbo
1. Press the mode button
2. Set the desired temperature.
3. Use the fan button
4. Press the turbo button
for 15 minutes, then at previously set speeds.
42
until the heat-
; this symbol will appear on the display. Cancel
until the auto mode symbol
to set the fan speed.
until the symbol appears for the operation you want.
to set the fan speed.
to set the time. Use the up button for hours and
again.
to set the time. Use the up button for hours and
until the fan symbol
to set the fan speed.
. The fan and compressor will run at maximum speed
, cool- of auto mode
appears.
again.
appears.
symbol