Initial Operation; Factory Settings - Becker Centronic SunWindControl SWC52 Notice De Montage Et D'utilisation

To activate the SWC52 control device, touch any button on the device. To select
the language required use the +/- buttons and confirm your selection with the
OK button. The SWC52 is now in automatic operating mode.
TIME/DATE:
SETTING:
FUNCTION:
Note
Press the RESET button (with a ballpoint pen or similar object) to re-
store the factory settings in the SWC52 device.
Exception: Function and language selection menu.

Initial operation

Factory settings

current CET and current date
threshold value SUN t 04 and SUN s 03
DELAY t 3 min (EXPERT MODE)
DELAY s 15 min (EXPERT MODE)
END LIMIT
SUMMER/WINTER ON
AWNING, DRIVE CONTROLLER, EXTERNAL SWITCH,
ALARM SIGNAL ON, EXPERT MODE OFF
de
en
fr
nl
39