Menu Button; Time/Date Menu; Program Menu - Becker Centronic SunWindControl SWC52 Notice De Montage Et D'utilisation

+/- buttons
The following operations are possible using the + and - buttons:
• Menu -> change value
• Auto mode -> request information
• + button -> next automatic switching time s
• - button -> next automatic switching time t

MENU button

By pressing the MENU button, you can see an overview of the menu or the op-
erating mode.
The currently displayed values are not stored.
RESET button
Press the RESET button (with a ballpoint pen or similar object) to restore the
device's factory settings (SWC52).
Exception: Function and language selection menu.

Time/date menu

TIME/DATE
This menu is used to set the time and the date.

Program menu

PROGRAM
The FUNCTION menu allows you to choose between switching and blocking
times.
These can be set via the PROGRAM menu.
SWITCHING TIME
Programmable switching times for extension and retraction of awnings.
BLOCKING TIME
Ensures that your awnings are not extended too early or retracted too late.
E.g.: blocking time t: 9:00
The sun protection system (awning) will not be extended before 9 a.m.
Blocking time s: 16:00
The sun protection system (awning) will be retracted at 4 p.m. even if the sun
is still shining.
de
en
fr
nl
35