General; Warranty - Becker Centronic SunWindControl SWC52 Notice De Montage Et D'utilisation

Assembly and Operating Instructions

General

The SWC52, which is pre-programmed ex works with the current date and time
(CET), operates your sun protection system on the basis of sunlight intensity
and wind speed.
The SWC52 can be operated manually at any time.
This device runs on battery power, meaning it can even be programmed if the
operating device has been removed, as the display does not disappear.

Warranty

Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g. crushing
of limbs. Therefore, structural modifications should only be carried out with our
prior approval and in accordance with our instructions, particularly the informa-
tion contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intend-
ed use is not permitted.
The end product manufacturer and fitter have to ensure that all the current stat-
utory, official regulations and, in particular, EMC regulations are adhered to dur-
ing utilisation of our products, especially with regard to end product assembly,
installation and customer advice.
28