Publicité
Les langues disponibles
Les langues disponibles
• Screw the Blending Cup Base on the Blending Cup clockwise (step 2).
• Place the Blending Cup Base Assembly onto the Motor Base and rotate
clockwise by holding the surface of the Blending Cup Base (step 3) to
lock until you hear a slight click. The markings on the Motor Base and
the Blending Cup Base should now be aligned with each other. If this is
the case, the Blending Cup Base Assembly is locked correctly. Now the
blender is ready for use.
• Plug in. Press the Power Button inwards and remains on as long as the
Power Button keeps pressed.
• After you have completed blending, Release the Power Button to stop
running.
• After use, unplug and dismantle
• Rotate anticlockwise to unlock and remove the Blending Cup Base
Assembly from the Motor Base.
• Place the Blending Cup assembly downwards. Unscrew the Blending
Cup Base anticlockwise from the Blending cup and pour out the food.
• Warning: The continuous operating time must be less than 1 minute.
Never blend hot oil, fat or meat. Do not operating without liquid.
• If your blender gets blocked, first stop and unplug before clearing.
• For the convenience of drinking clean and fresh mixture, screw the
Blending Cup Cap on the Blending Cup clockwise. The snap fastener on
the Blending Cup Cap is designed to easily portable. Push up the snap
fastener to open the outlet when drinking or pouring out the inside
mixture at any time. The Blending Cup Cap can also be placed onto the
bottom of the Cup when blending.
• Always switch off and unplug before cleaning. Please refer to the
instruction in the "care and cleaning".
The Guide to Your Blender (with Plastic Blending Cup)
Processing
Task
Milkshakes,
Aerating
smoothies
Creaming
Butter
Food
Use chilled milk. Blend it until desired
consistency is achieved.
Blend butter until creamed. DO NOT OVER-
PROCESS.
Suggested Processing Procedure
13
Publicité
