Indel Webasto Marine Compact Classic Instructions Pour L'installation Et L'utilisation page 51

User Manual
Most FRIDGE version Compact Cooling Units can be converted into freezer versions
if necessary.
The following factors must be taken into consideration to perform this conversion:
- The total volume that the unit can cool in the FREEZER version is equivalent to
1/3 of the volume indicated for the FRIDGE version.
- Insulation thickness must be increased (see the table of insulation to be
included).
- The thermostat should be replaced with a thermostat kit suitable for the
conversion (contact your local Dealer for assistance).
Warning:
- The purpose and function of the Isotherm Compact cooling unit when used
as freezer, is only to keep completely frozen food products frozen while they
are stored in a sealed and properly insulated space. The Isotherm Compact
will not freeze unfrozen or partially frozen food products. Should any unfrozen
or partially frozen food product be stored in the freezer this is considered
to be a misuse and could result in possible unintended thawing of the food
product which may lead to safety issues, sickness or injury if ingested. Storage
of unfrozen or partially frozen food products in the Isotherm Freezer may also
affect the quality of other frozen food products stored within the freezer.
- Exposure to temperatures exceeding the temperature range of the climatic
class for which the freezer and its insulation is made, power supply
interruptions and or frequent opening of the freezer, may also affect the
effectiveness of the Isotherm Compact cooling unit and the quality of the
contents of the freezer. The user should always check the quality of the food
products prior to ingestion.
- Misuse or use of the Isotherm Compact cooling unit in any way contrary to
this manual gives rise to no cause of action against the manufacturer and or
supplier.
51