Applied Standards - Plusmed plusSCAN Mode D'emploi

1. Consistent low temperature readings
• Perhaps the lens is not positioned properly. Ensure the device is
being used correctly.
(see page 24 "Measuring Temperature")
• The Measurement Sensor or Lens may be dirty and require clean
ing. Clean the lens with a piece of soft, alcohol-moistened cotton
cloth thoroughly.
(See page 30 "Storage and Cleaning" )
• Please be aware that the device may register lower readings
when the object or patient's forehead is damp, wet or perspiring.
2. The device can not operate
• When battery power is too low, the device will not operate pro-
perly. Replace the batteries as appropriate.
This product conforms to the provisions of the EC directive MDD
(93/42/EEC). The following standards apply to design and/or manu-
facture of the products:
• EN 12470-5:2003
Clinical thermometers - Part 5: Performance of infra- red ear
thermometers (with maximum device)
Troubleshooting

Applied Standards

31