Plusmed plusSCAN Mode D'emploi page 25

Taking the Temperature of an Object
"Object" mode
display
"Object" mode
display
Measuring Temperature
NOTE: Be sure the thermometer is set to measure
the temperature of an object.
1. If the thermometer is off, press the 'Power'
button to turn the thermometer on.
2. Press and hold the 'SCAN' button. The screen
should appear.
4-6 cm
3. Aim the front of the thermometer
at the object.
Hold the thermometer approxi
mately 4-6 cm away from the ob-
ject and release the 'SCAN' button.
4. The thermometer will beep once
and show the temperature read
ing. The display will illuminate for
3 seconds.
5. The thermometer will automatically
beep and shut-off after approxi
mately one minute of non- use.
25