BestMatic COM-125597.1 Mode D'emploi page 15

Using a screwdriver, dismantle from the
middle hinge, lift the door upwards to
3 disengage it from the lower hinge. Put the
door to one side and lay it down gently on a
padded surface.
Take out the hinge pin out, rotate the hinge 180
degrees, reverse and reinstall it to the opposite
4 side. Swap over the position of the lower hinge
and the adjustable leg to the other side of the
cabinet.
Remove the hinge pin that is in the bottom of
the fridge and freezer door. At the other side of
5 fridge and freezer door, insert the replacement
hinge pin that is supplied with the appliance
inside the parts bag.
Place the freezer door on the lower hinge,
making sure that the hinge pin is inserted in the
hole at the bottom of the freezer door, put the
6
middle hinge back on the cabinet, making sure
that it is on the opposite side from its original
position.
Place the fridge door on the middle hinge,
making sure that the hinge pin is inserted in the
7 hole at the bottom of the fridge door. Place the
top hinge on the fridge door, fixing the screw
and cover.
Take out the top hinge from top refrigerator
door, rotate the top hinge 180 degrees, take out
8
the hinge pin out, reverse and reinstall it to the
opposite side.
Take the left top hinge cover parts from the bag
9 and install it to the left side, tighten all the
screws.
- 14 -