Bodum BISTRO 10709-16 Mode D'emploi page 5

DESCRIPTION OF APPLIANCE
A Variable browning setting knob
B Defrost button
C Stop button
D Control lever/ high rise
E Variable width toasting slots
F Rack for bread/ bagels/ croissants
G Lift button for the racks
H Slide out crumb tray
I Cord storage
K Power cord
INSTALLATION
– Place the appliance on a stable flat surface which is
neither hot nor near a heat source. The surface must be
dry. Keep the appliance and its mains cable out of reach
of children.
– Ensure that the voltage indicated on the rating plate of
the appliance agrees with the mains voltage in your area.
Connect the appliance only to a properly earthed power
point with a minimum output of European 5A / US 8A.
(Use a residual current device (RCD) or seeks the advice of
an electrician.) While the appliance is in use, the mains
plug must be accessible in case of an emergency. The
manufacturer declines any liability for accidents caused by
faulty or non existing earthing of the appliance.
– If the power point is unsuitable for accommodating the
plug of your appliance, have the power point changed by
a licensed electrician.
USING FOR THE FIRST TIME
– Carefully unpack the toaster and remove all of the
packaging material.
– Before using for the first time, to eliminate the new
smell, operate the toaster without bread inside for at
least 5 minutes. Ensure there is plenty of ventilation in
the room.
CAUTION:
Be cautious of hot surfaces!
Coming into contact with hot surfaces can cause burns.
4
This sign (hot surfaces) is placed on the top
of the toaster!