fortress S-Serie Manuel D'utilisation page 40

15.3 MoDel: FortreSS S700
ISo 7176-15
OVERALL LENGTH
OVERALL WIDTH
TOTAL MASS (WITH BATTERIES)
MASS OF THE HEAVIEST PART
STATIC STABILITY DOWNHILL
STATIC STABILITY UPHILL
STATIC STABILITY SIDEWAYS
ENERGY CONSUMPTION (MAX. RANGE)
DYNAMIC STABILITY UPHILL
OBSTACLE CLIMBING
RAMP TRANSITION
MAX. SPEED FORWARD
MIN. BRAKE DISTANCE FROM MAX. SPEED
MAX. SPEED REVERSE
EFFECTIVE SEAT DEPTH
EFFECTIVE SEAT WIDTH
SEAT SURFACE HEIGHT
BACK REST ANGLE
BACK REST HEIGHT
FORE / AFT SEAT ADJUSTMENT
SEAT WEIGHT WITH SLIDE
TOP OF ARM REST TO SEAT
MIN. TURNING RADIUS
MIN. TURN BETWEEN WALLS
NOMINAL BATTERY VOLTAGE
REVERSING WIDTH
ADDItIoNAl SPecIFIcAtIoNS
MAXIMUM POTENTIAL RANGE
CONTROLLER CUT-OFF VOLTAGE
BATTERY CAPACITY
BATTERY FUSIBLE LINKS
BATTERY CHARGER LOOM FUSIBLE LINK
BATTERY CHARGER
MAX. CURB HEIGHT
GROUND CLEARANCE
REAR SUSPENSION TRAVEL
FRONT SUSPENSION TRAVEL
REAR WHEEL DRIVE
SCOOTER PUSH FORCE
CRASH TESTED
TIRE PRESSURE
* Exceeds recomended dimensions.
40 Fortress S-Series
MIN. MAX. coMMeNtS
*1500 mm *1500 mm STANDARD CONFIGURATION
657 mm 657 mm STANDARD CONFIGURATION
145.5 kg 145.5 kg STANDARD CONFIGURATION
- 35 kg SEAT
- 10° 160 KG USER
- 10° 160 KG USER
- 10° 160 KG USER
- 35 km TO ISO 7176-14 (SEE SECTION 9.13)
- 10°-18% 160 KG USER
- 100 mm STANDARD CONFIGURATION
18° 18° WITHOUT HIGH CENTERING
15 kph STANDARD CONFIGURATION
- 6 m WITH STANDARD PROGRAMMING
- 50% % OF FORWARD SPEED
490 mm STANDARD CONFIGURATION
490 mm STANDARD CONFIGURATION
450 mm 500 mm TO SCOOTER FLOOR (3 POSITIONS)
-70° 60° FROM VERTICAL
525 mm STANDARD CONFIGURATION
+30 mm FROM REAR MOST POSITION
35 kg STANDARD CONFIGURATION
230 mm ARM REST SET AT 90°
2950 mm STANDARD CONFIGURATION
2250 mm STANDARD CONFIGURATION
24V 24V TWO 12V BATTERIES
2250 mm
MIN. MAX. coMMeNtS
55 km INDUSTRY BENCHMARK (SECTION 9.15)
16V DRIVE STOPS
55Ah 75Ah SEE OPTIONS
- 100A IN-LINE FUSE ON EACH BATTERY
- 15A
8A AUTOMATIC CYCLIC
100 mm
100 mm 130 mm
50 mm UNLADEN
40 mm UNLADEN
- - 4 WHEEL SCOOTER
100N IN FREE-WHEEL
NO
40psi