fortress S-Serie Manuel D'utilisation page 21

5.10 Scooter cAPe AND leG cAPe:
These options offers additional protection for the
scooter user in poor weather conditions, (FIG.5.22).
WArNING!
Ensure the capes are correctly fitted and are not
obstructing the controls of the scooter or in contact with
the scooter moving parts.
5.11 oXyGeN bottle HolDer:
The Oxygen Bottle Holder (A), fits to the seat via the
straps provided.
The holder is designed to accept a 4 kg bottle,
(FIG.5.23).
WArNING!
• While you are taking oxygen, observe all safety
regulations pertaining to the use of oxygen.
• Do not enter an area where naked flames may be
used.
• Do not smoke.
• Do not use transmitting devises such as mobile
phones etc.
• Do not attempt inclines with this accessory fitted, as
it may cause the scooter to become unstable.
5.12 reAr VIeW MIrrorS:
Your scooter is fitted with rear view mirrors as standard.
To adjust the mirrors, while seated, simply hold the
mirror head and gently move it into the position that
allows you to see clearly behind you. Adjust both mirrors
to enable complete rear vision for both sides of the
scooter, (FIG.5.23).
cAUtIoN!
The mirror has an articulated joint in its stem, take care
not to use excessive force when adjusting.
To remove the mirror; use a 14 mm wrench to loosen
the securing nut, then support the mirror stem and turn
it counter-clockwise until it screws out of the handle
bar. To refit the mirror, reverse the above procedure
tightening the securing nut to a torque of 10-15 Nm,
(FIG.5.23).
5.13 SolID tIreS:
Solid tires are available as an option.
The solid tires offer greater security for the user
because they cannot be punctured.
Note: Solid tires have the effect of producing a firmer
ride, (FIG.5.24).
b
FIG.5.22
A
FIG.5.23
FIG.5.24
Fortress S-Series 21