Charging the battery and operating the appliance
16
Assembly of the appliance
Charging the rechargeable battery
Vacuum cleaning floors
illustrated quick start guide.
It is best to charge the rechargeable battery before each use, especially after the appliance has not
been used for a while.
This increases the useful life of the rechargeable battery and ensures the longest cleaning cycles.
1. Make sure that the appliance is switched off. Otherwise the appliance can not be charged.
2. Plug the adapter plug from the mains adapter provided into the charger's connection socket.
3. Connect the mains adapter provided to an outlet socket.
4. Place the appliance on the charger. The LED on the appliance blinks.
5. Wait until the LED goes off. The battery inside the appliance is fully charged.
For further information, see also illustrated quick start guide.
1. Make sure that the surface can withstand the rotating brushes undamaged.
2. Switch the appliance on (1x
3. Clean the floor.
4. Switch the appliance off (3x
5. Empty and clean the dust container (see chapter „Appliance maintenance and ordering spare
parts").
SC 7172.book Seite 16 Montag, 5. Oktober 2015 2:12 14
3
Charging the battery and operating the appliance
Use as a hand-held vacuum
: Power Mode, 2x
: Eco Mode).
).
1. Make sure that the appliance is switched off.
2. Hold the hand-held vacuum cleaner with one hand.
3. Press the two unlatching buttons on the handle with the
other hand (see illustration to the left).
4. Fit one of the accessory nozzles provided, illustrated
quick start guide.