Publicité
Les langues disponibles
Les langues disponibles
Gas-Tester
1.
General Description
The MSA AUER Gas-Tester/ThumbPump Sampler in combination
with detector tubes is used to measure the concentrations of
hazardous gases and vapors in air or technical gases. A charac-
teristic color stain is formed for each type of detector tube when the
appropriate number of pump strokes are performed; the length of
this stain indicates the concentration of the hazardous substance.
2.
Design/Construction (see Fig. 1)
The Gas-Tester/ThumbPump Sampler is a suction ball-type detector
tube pump. Compressing the suction ball and inflating will sample a
volume of 100 ml (volume per pump stroke) on the inserted detector
tube tightly.
1
Locking screw
2
Counting device disc
3
Washer
4
Bushing (pkg. of 2)
5
Pump body
6
Spring pin
Tap screw
7
Counting device spring
8
Tube breaker (pkg. of 2)
9
Valve opening
10 Valve washer (pkg. of 3)
1 1 Suction ball
12 Operating ring
Part No
D5140002
D5140003
D0010963
D5140921
D5140001
D5140008
D0006192
D5140009
D5140925
-
D5140923
D5140012
-
7
Publicité
