Tips For Use - tomado TM-1355 Mode D'emploi

• Remove the plug from the mains power socket.
• Allow the appliance to cool down completely.
• Clean the appliance, see 'Cleaning and
Maintenance'.
Comment:
• If water droplets are formed as well as steam whilst
ironing, set the temperature-control dial to a higher
setting.
Ironing without the use of steam
PLEASE NOTE:
• The appliance's soleplate will become hot during
use. Do not touch it.
Iron synthetic fabrics, such as nylon en polyester, at a
low temperature.
• Stand the iron on its heel on a level, stable, heat-
resistant surface.
• If you wish to use the spray button whilst ironing, fill
the water reservoir with water, see 'Filling the water
reservoir'.
• Turn the steam control to '0'. Since you are ironing
at a low temperature, you will not be able to use
steam. Set the steam control to '0' to prevent water
from dripping out of the iron onto your clothes.
• Insert the plug into the mains power socket.
• Set the temperature control dial to the desired
setting. The temperature indicator will be lit. The
temperature indicator light will go out once the set
26
Instruction manual
temperature has been reached.
• Take the iron by the handle.
• Iron your laundry.
• Press the spray button to moisten the fabric while
ironing.
• Stand the iron on its heel after use.
• Turn the temperature control dial to '0'.
• Remove the plug from the mains power socket.
• Allow the appliance to cool down completely.
• Clean the appliance, see 'Cleaning and
Maintenance'.

TIPS FOR uSE

• Always check the ironing instructions in your clothes.
• See the table below for the correct temperature
setting.
• NYLON Synthetic fabrics such as nylon
and polyester
•• SILK Silk
•• WOOL Wool
••• COTTON Cotton
MAX LINEN Linen
• Always start by ironing fabrics that need to be
ironed at a low temperature. Then iron fabrics that
can be ironed at a higher temperature.
TM-1355