Bulb Replacement - Candy CMBS655X Mode D'emploi

BULB REPLACEMENT

Important :
Note:
 Before replacing light that the cooker hood can be isolated from the supply
mains by means of a plug or an all-pole switch.
 Protect against danger when changing lights, such as wearing gloves.
Changing the lights:
 Remove the grease filter.
 Use a tool or the hand to press the spring splinterof both sides of LED light to the
inside, until the light is pressed out, see pic 1.Then slightly pull the light connecting
wire out, and dismantle the terminal of the light connecting wire. See pic 2.
 Apply the reverse procedure to install the light back.
• ILCOS D code for this lamp is: DSR-1.5/65-S-64
– LED modules –round lamp
– Max wattage: 2×1.5 W
– Voltage range: DC 12V
– Dimensions:
 The bulb must be replaced by the manufacturer, its
service agent or similarly qualified persons.
 Always switch off the electricity supply before
carrying out any operations on the appliance. When
handling bulb, make sure it has completely cooled
down before any direct contact with hands.
 When handling bulbs hold with a cloth or gloves to
ensure perspiration does not come in contact with
the bulb as this can reduce the life of the bulb.
12