Softing CableMaster CM600 Guide De Démarrage Rapide page 4

NETWORK / POE DETECTION
• Power on the CableMaster 600/650.
• Connect the CableMaster 600/650 to a switch
or active network jack.
• Use the left or right arrow buttons to select the
Network/PoE icon
and press the enter button or press the
Network/POE soft key.
• The CableMaster 600/650 will automatically
detect and display link capability, connection speed, PoE class, and PoE Min/Max
voltages.
• To perform a Network Test only, press the PoE soft key.
• To save the PoE data, press the Save soft key.
• Use the arrow buttons and the enter button to name the PoE file.
• Press the Save soft key to save the PoE file.
LINK LIGHT
• Power on the CableMaster 600/650.
• Connect the CableMaster 600/650 to an active
Network cable or port.
• Press the Network/Poe soft key
press the Link Light soft key.
• The Link Light will automatically begin upon
entering the Link Blink menu.
• The Link LED above the LCD screen will flash at the same cadence as
the port light.
• Use the up and down arrows to adjust the transmit frequency to suit the switch
characteristics.
4
then