BWT P-FI 400 Notice D'installation Et Conseils D'utilisation page 15

5
Check that the collector plate is correctly positioned
at the bottom of the filter tank. Insert the collector
pipe (topped with its plug) into the hole in the middle
of the collector plate.
Quantity of sand
Grain size
7
Installing the pressure gauge: Place the o-ring in its
groove in the cover.
FILTRATION
P-FI 400 20 Kgs
P-FI 500 50 Kgs
0.6 / 1.25
6
Carefully pour the sand into the filter and,using
your hand, spread it out evenly.
8
Position the pressure gauge correctly and place it
in its housing.
2021/01 - Indice de révision : G - Code : 26650
15/32