Technical Data - Profi Care PC-HT 3017 Mode D'emploi

Notes on Use
• If you wish to dry specific sections of your hair only, at-
tach the styling nozzle. That will concentrate the air flow.
• In order to remove the nozzle, let the appliance cool
down. You can speed up that process by pressing the
COOL button for approx. ½ minute during operation.
You may then simply remove the nozzle.
Electrical Connection
1. Before inserting the plug into the socket, make sure that
the mains voltage to be used matches that of the appli-
ance. You can find this information on the nameplate.
2. Connect the appliance to a properly installed earthed
socket.
Use
1. Turn the appliance on with the bottom switch on the
handle.
2. Select an air stream level on the handle (bottom switch):
Position 0:
off
Position : gentle stream of air
Position : strong stream of air
3. Setting the Temperature level (top switch):
Position : low temperature
Position : medium temperature for gentle drying
and shaping
Position : high temperature for rapid drying
WARNING:
• Before cleaning remove the mains lead from the socked.
• Under no circumstances should you immerse the appliance in
water for cleaning purposes. Otherwise this might result in an
electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Air Intake Grill
Please clean the grill on the air intake side of the hairdryer
regularly in order to avoid excessive temperatures as a
result of heat accumulation.
1. Unscrew the grille in an anticlockwise direction.
2. Remove any dirt that is present.
3. If necessary, a fine brush can be used.
PC-HT3017_IM
COOL (Cold Air)
With this switch you can stop the heating process.
Hold the button down in this position according to the de-
sired interval length. When the button is released it returned
automatically to the initial position.
Ionizing Function – Reduction of Static in Hair
The appliance is also fitted with an ionizer which gives off
negative ions with the air flow when switching on. This pro-
cess supports safe, gentle drying of hair and also promotes
a better hair structure, maximizes hair volume, provides for
a silky finish and also reduces static in the hair.
This process is particularly gentle on stressed hair.
Switch-off
Set the switch to "0" after use and disconnect from the
mains.
Storage
• Leave the appliance to cool down before putting it away!
• Hang the appliance up by the suspension eye.
Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the appliance, as over
time this may result in the cable breaking.
• Check the mains cable regularly for damage.
Cleaning
4. Turn the grille tight in a clockwise direction. It has to
snap in audibly.
Model:..................................................................PC-HT 3017
Power supply:.....................................220 - 240 V~, 50 / 60 Hz
Power consumption: ........................................ 1800 - 2200 W
Protection class: ...................................................................
Net weight: ..................................................... approx. 0.75 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.

Technical Data

02.01.18
25