Notes On Use; Use; Cleaning; Technical Data - Profi Care PC-HTD 3047 Mode D'emploi

Notes on Use

• Fully unwind the mains cable.
• Fit on a nozzle.
• If you wish to dry specific sections of your hair only, attach
the styling nozzle. That will concentrate the air flow.
• The diffuser is the ideal solution to dry curly hair without
losing volume.
• In order to replace the attachment, first remove the old
attachment by pulling it off and then pushing on the new
one until it clicks into place.
Electrical Connection
1. Before inserting the plug into the socket, make sure that
the mains voltage to be used matches that of the appli-
ance. You can find this information on the nameplate.
2. Connect the appliance to a properly installed earthed
socket.

Use

1. Select an air stream level on the handle (
Position 0: off
Position 1: gentle stream of air
Position 2: strong stream of air
2. Setting the Temperature level ( switch):
Position 1: low temperature
Position 2: medium temperature for gentle drying and
shaping
Position 3:
high temperature for rapid drying
WARNING:
• Before cleaning remove the mains lead from the socked.
• Under no circumstances should you immerse the appliance in wa-
ter for cleaning purposes. Otherwise this might result in an electric
shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Air Intake Grill
Please clean the grill on the air intake side of the hairdryer
regularly in order to avoid excessive temperatures as a result
of heat accumulation.
1. Unscrew the grille in an anticlockwise direction.
26
PC-HTD3047_IM
COOL (Cold Air)
With this switch you can stop the heating process.
Hold the button down in this position according to the desired
interval length. When the button is released it returned auto-
matically to the initial position.
Ionizing Function – Reduction of Static in Hair
The appliance is also fitted with an ionizer which gives off
negative ions with the air flow when switching on. This pro-
cess supports safe, gentle drying of hair and also promotes
a better hair structure, maximizes hair volume, provides for a
silky finish and also reduces static in the hair.
This process is particularly gentle on stressed hair.
Turn the hairdryer on by moving the „ " switch to the I posi-
tion. The control lamp lights up in green. To turn the appliance
off, move the switch to „0".
Switch-off
After use, move the right-hand switch ( ) to the „0" position
and remove the mains plug from the socket.
switch):
Storage
• Leave the appliance to cool down before putting it away!
• Hang the appliance up by the suspension eye.
Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the appliance, as over
time this may result in the cable breaking.
• Check the mains cable regularly for damage.

Cleaning

2. Remove any dirt that is present.
3. If necessary, a fine brush can be used.
4. Turn the grille tight in a clockwise direction.
Model:................................................................. PC-HTD 3047
Power supply:................................................230 V~, 50 / 60 Hz
Power consumption: ..................................................... 2200 W
Protection class: ....................................................................Ⅱ
Net weight: ....................................................... approx. 0.55 kg

Technical Data

26.06.19