Wallbox COPPER SB Guide D'installation page 12

EN
5. Closure of the device (I-6.1, I-6.2)
Step 5.1: Reconnect the ribbon cable to the cover.
Step 5.2: Close the front cover, taking special care
with the fitting and ensuring that the O-ring remains
in place. Then tighten the nine screws.
Step 5.3: Secure the frame by tightening the Torx
screws.
6. Configuring IT network
Step 6.1: Download the Wallbox App available from
Android Play Store or Apple App Store.
At this point the Copper is registered in myWallbox.
To further configure the network as IT follow the
next steps:
Step 6.4: Enter Wallbox App and select your
charger from the charger list.
12
Step 6.2: Log-in using your
account.
I-6. 1
I-6.2
Step 6.3: Add your
charger by clicking on the
"+" button on the main
page, introduce the SN
and UID of your charger.