HAEGER Eco Desumi 10 Série Mode D'emploi page 8

English
Humidity Level & Timer 2 digits display
The indicator features 3 functions:
1. when you set the humidity, it will indicate the humidity that you have
selected.
2. when you program the time for the unit to turn on and off, it will show the
hours.
3. When the environment humidity is lower than 35%, it will show "LO"
4. When the environment humidity is higher than 95%, it will show "HI"
Push Button Functions
A Power Push Button ..................
B DOWN Push Button ................
C UP Push Button ........................
D Timer Push Button ...................
Notes:
- Water tank must be correctly installed for the dehumidifier to operate.
- Do not remove the tank while unit is in operation.
- If you want to use drain hose to drain water away, please install the hose
according to section "continuous external draining".
Operating instructions
1. Press
2. Press
can be set from 30% to 90% at 5% intervals.
After a period of working, when environment humidity is lower than the
selected humidity by 2%, compressor will stop, and fan stops working 3 minutes
6
button once to start operation. Press it again to stop operation.
or button to set the desired humidity level in the room, which
Instructions for use