BoomToneDJ Sky bar 288 Led Mode D'emploi page 14

A. By Master/slave Built-in Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other
units to give an automatic, sound activated, synchronized light show. This function is
good when you want an instant show. You have to set the first unit in master mode
and select
Its DMX input socket will have nothing plugged into it, and Its master LED will be
constantly on and sound LED will flash to the music. The other units will have to
select (normal) or
sockets (daisy chain) and the slave led lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address
from 1 to 512 channel so that the units can receive DMX signal.
Press the MENU button up to when the
Use DOWN and UP button to change the DMX512 address. Once the address has been selected,
press ENTER button to confirm. To go back to the functions without any change press the MENU
button again.
(random show),
, Their DMX cables plugged into the DMX input
is showing on the display. Pressing ENTER button .
(show 1) or ...or (show 9).
13