Crsc (Clean Reception System Circuit); Auxiliary Input Display Setting - Kenwood KDC-MP225 Mode D'emploi

CRSC (Clean Reception System Circuit)

Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
Display
"CRSC ON"
"CRSC OFF"
Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned ON. In such a situation,
turn it OFF.
Auxiliary Input Display Setting & Station/Disc Naming
For selecting the display when switched to Auxiliary input
source. For the Station/Disc Naming refer to the <Station/Disc
Naming (SNPS/DNPS)> (page 12).
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX EXT" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Auxiliary input display setting mode
Press the [FM] or [AM] button.
Select the "AUX NAME" display.
4
Enter Auxiliary input display setting mode
Press the [4] or [¢] button for at least 2 seconds.
The presently selected Auxiliary input display is displayed.
<In FM reception>
Setting
The CRSC is ON.
The CRSC is OFF.
— 21 —
5
Select the Auxiliary input display
Press the [4] or [¢] button.
Each time the button is pressed the display switches as shown
below.
• "AUX EXT"
• "TV"
• "DVD"
• "VIDEO"
• "GAME"
• "PORTABLE"
6
Exit Auxiliary input display setting mode
Press the [MENU] button.
When operation stops for 10 seconds, the name at that time is
selected, and Auxiliary input display setting mode closes.