König KN-WS500N Mode D'emploi page 4

2. CH Button
Press CH button to select between channel 1, 2, and 3 when receiving
a signal from transmission. Please note that the selected channel must
comply with the channel set for transmission, e.g. if the transmission is set
to channel 1, then the station needs to be set to channel 1 as well.
3. UP Button at the rear
The function for this button is the same as the 12/24 on the front; it can
toggle between 12/24-hour formats.
4. DOWN Button at the rear
In normal display mode press this button to toggle between degrees
Celsius or Fahrenheit.
5. ALARM/SET Button
Press ALARM button at the rear to display the alarm time.
To set the alarm time, press ALARM once, the alarm time displays. Press
and hold the button for 3 seconds, the alarm HOUR digit flashes, use UP or
DOWN to set the alarm hour.
Press the ALARM button again, the alarm MINUTE digit flashes, use UP or
DOWN to set the alarm minutes. Then press ALARM again to finish the
alarm setting.
The alarm icon will display after finishing the alarm setting. Press ALARM/
SET again to turn off the alarm icon.
6. TIME/SET Button
Press TIME/SET button and hold for 3 seconds when beep sounds, YEAR
digit flashes. Use UP or DOWN button at the rear to set the YEAR.
Press TIME/SET again twice, the MONTH digit flashes, use UP or DOWN at
the rear to set the MONTH.
Press TIME/SET button again, the DATE digit flashes, use UP or DOWN at the
rear to set the DATE.
Press TIME/SET button again twice, the HOUR digit flashes, use UP or DOWN
at the rear to set the HOUR.
Press TIME/SET button again, the MINUTE digit flashes, use UP or DOWN at
the rear to set the MINUTE.
Press TIME/SET again twice to resume normal display mode.
7. RESET Button
Press this button to reset all function.
4
ENGLISH