König KN-WS500N Mode D'emploi page 2

Part I
This weather station has 7 different language options: English, German, French,
Italian, Spanish, Dutch and Danish.
The weather station has 6 different buttons: CH, ALERT, MAX/MIN, C/F, 12/24,
SNOOZE/LIGHT. These buttons are used for the following functions:
1. CH Button
The CH button is used to select channel 1, 2 or 3 while receiving the signal
from the transmitter. Please note that the selected channel must comply
with the selected channel on the transmitter. For example: if the transmitter
is set to channel 1, the weather station needs to be set to channel 1 as well.
2. ALERT Button
While in normal display mode, press this button to activate or deactivate
the temperature alert function. An arrow icon will appear to indicate the
function has been activated, or the arrow icon will disappear to indicate the
alarm is deactivated.
While in normal display mode, press and hold this button for 3 seconds to
enter the temperature alert settings. The indoor temperature digits will
start flashing; press the DOWN button at the rear to set the temperature
(0 °C~50 °C) at which the station has to sound an alarm.
3. MAX/MIN Button
Press this button to display the maximum temperature and humidity of
both indoors and outdoors.
Press again to display the minimum temperature and humidity of both
indoors and outdoors.
4. Set Alarm
Press ALARM button at the back to display the alarm time.
To set the alarm time, press ALARM time once, the alarm time displays, hold
the button for 3 seconds, alarm HOUR digit flashes, use UP or DOWN to set
the alarm hour.
Press the ALARM button again, the alarm MINUTE digit flashes, use UP or
DOWN to set the alarm minutes.
5. Activate/Deactivate the Alarm Function
Under Alarm Mode , press "ALARM" button at the rear to activate or
deactivate the alarm function. Alarm bell sign will appear or disappear
accordingly.
2
ENGLISH