HORIZON EX-58 Manuel Du Propriétaire page 9

eX-58, ce5.1 ASSEMBLY Step 7
CE5.1
EX-58
CONSOLE MAST
WATER
BOTTLE
HOLDER
CONSOLE MAST BOOT
SCREW (S)
16
EX-58-EX-78-GS1050E-CE5.1-OM-rev1.5.indd 16-17
HarDWare BaG 7 CONTENTS :
SCREW (S)
12 mm
SCREWS (S)
Qty: 3
TOP CAP
* This step is for CE5.1 and EX-58 models only.
* EX-68, EX-78, gS1050E models skip to next page.
Open hardware bag 7.
A
Silde top cap over console mast and
B
snap into place.
Insert console mast boot over top cap
C
and snap into place.
Slide water bottle holder over
D
console mast and attach using 3
screws (s).
ASSEMBLY Step 8
ce5.1, eX-58 SHoWn
CONSOLE
CONSOLE CABLES
UPPER HANDLEBAR
BOLTS (T)
CONSOLE MAST
NOTCH
PRE-INSTALLED
SET SCREWS
TAB
LOWER HANDLEBAR
NOTE: Be careful not
to pinch any wires while
attaching the console.
HarDWare BaG 8 CONTENTS :
BOLT (T)
10 mm
Qty: 4
Open hardware bag 8.
A
Attach the conSole caBleS to the
B
conSole.
Carefully tuck the conSole caBleS into
C
the conSole MaSt before attaching the
conSole. Attach conSole to conSole
MaSt using 4 BoltS (t).
D Slide Upper HanDleBarS onto loWer
HanDleBarS and align notcH with taB
making sure handlebars are joined together
completely. Secure Upper HanDleBarS
to loWer HanDleBarS using pre-
attacHeD Set ScreWS.
Repeat step D on other side.
E
YOU ARE FINISHED!
8/17/09 8:07 AM
all
MoDelS
17