emerio UVC-121220.15 Mode D'emploi page 6

UVC-121220.15
PARTS DESCRIPTION
1. Main unit
2. Dust cup
3. Extension tube
4. Floor brush
5. 2 in 1 nozzle
6. Turbo speed button
7. On/off button
8. Dust cup release button
9. Accessory release button
10. Suction hole opening
11. Battery pack
12. Wall-mounted bracket
13. Charger
14. Floor brush lights
15. Battery pilot lights
To use the wall-mounted bracket, just hang the bracket onto the wall
and fix it with screws provided. Locate the appliance onto the wall-
mounted bracket.
How to detach and attach the battery pack

To detach the battery pack, switch the battery lock switch (A) to the
"unlock" position, then push the battery pack release button (B) to take
off the battery pack.

To attach the battery pack, put the battery pack into the place and
switch the battery lock switch (A) to the "lock" position.
OPERATION
1. Insert the extension tube into the suction hole opening; make sure it fits firmly.
2. Attach the floor brush to the other side of the extension tube.
3. If you want to use the attachment 2 in 1 nozzle, attach it to the suction
hole opening directly or to the other side of the extension tube instead
of the floor brush according to your own desire.
Note: The floor brush can also be attached to the suction hole opening
directly.
4. Press the on/off button to turn on the appliance. The appliance will
operate with normal speed. The battery pilot lights and floor brush
lights will illuminate.
5. Press the turbo speed button, the appliance will switch to turbo speed.
Press this button again, the appliance will switch back to normal speed.
- 5 -
EN