3/ Using Your Appliance; Before The First Use; Functioning - Brandt BC53X Manuel D'instruction

3/ USING YOUR APPLIANCE

A. Before the first use
•
Put the batteries in or remove the plastic sheet and ensure +/- terminals are correct. The LCD
will be on as below.
•
Close the battery door and put the scale on flat table. The scale will enter weighing mode
automatically.
Note: If there is a weight shown on the LCD, please touch
•
Touch to select desired unit. G = gram, lb =Pound, oz = Ounce, fl.oz = liquid ounce
Note: When finishing selecting unit, you may start to weigh. If there is not any operation and the
weight is steady in weighing mode, the scale will turn off automatically after about 60s.
B. Functioning
The weighing
•
Please put the scale on hard flat table.
•
Touch to switch on (image 1 and 2)
•
You can start to weigh when "0" is shown on the LCD (image 3)
•
Please put the weight into the middle of the container, the weight
data will be shown (image 4 and 5)
Note: If there is any operation the backlight will be off after about 10s
and the scale will turn off automatically after about another 50s.
14
to set it to zero.