Description Of Your Appliance; Using Your Appliance; Before The First Use - Brandt BC52N Manuel D'instruction

2 DESCRIPTION OF YOUR APPLIANCE

Unit button
 Touch to switch on to enter weighing mode;
 Touch and hold
 Touch to make tare function in weighing mode.
 Touch to select desired unit in weighing mode

3 USING YOUR APPLIANCE

3.1 Before the first use

 Put the batteries in or remove the plastic sheet and ensure +/- terminals are correct. The LCD
will be on as below.
 Close the battery door and put the scale on flat table. The scale will enter weighing mode
automatically.
Note: If there is a weight shown on the LCD, please touch
 Touch to select desired unit. G = gram, lb =Pound, oz = Ounce, fl.oz = liquid ounce
Note: When finishing selecting unit, you may start to weigh. If there is not any operation and the
weight is steady in weighing mode, the scale will turn off automatically after about 60s.
LCD Display
for about 2s to switch off
ON/OFF/TARE button
to set it to zero.
17