Brandt BC53X Manuel D'instruction page 16

Cooking timer
Switch between timer and weighing
When the scale is in weighing mode, touch
be closed.
When the scale is in timer mode, touch
This balance has a timer which allows you to control your cooking time
•
Touch to switch on to enter timer mode.
Note: If it is not the first time to set the timer, it will start with the value
set last time. You can touch
•
Touch time and again to set the units digit of minute, but
touch and hold to set the tens digit of minute.
•
Touch time and again to set the units digit of second, but
touch and hold to set the tens digit of second.
•
After finishing the setting, touch
timer.
Note: In the count down process, you can touch
the timer.
•
When count down finishes, the scale will give a "beep beep" signal
for 1min. You can touch any key to stop it.
to switch to timer mode and the weighing function will
to switch to weighing mode.
16
for about 2s to reset the value to zero.
to confirm it and start the
to pause and continue