Functional Description - Bosch FMR-5000-C Guide D'installation

22 en
WARNING!
Live components and stripped cable! Risk of injury from electric shock. The system must be
current-free during connection work.
NOTICE!
Installation must only be performed by authorized and specialized personnel!

Functional Description

The Remote Keypad can be used to perform the same operating procedures as the control
panel, enabling variable operation of a networked system. It has the following functional
elements (see Figure 1, Page 4):
Pos. Designation
A Touch screen
B 22 fixed buttons
C 11 LEDs
D Key switch
E Reboot button
F 6-pin DIP switch
G 3 rotary switches
Installation
Follow the mounting instructions according to the mouting variant for your application.

Mounting variants
Surface wall mounting
Flush wall mounting
Tilted installation
Wiring


The Remote Keypad has
-
-
-
-
Consider the maximum cable length of 2 m when using the USB and RS232 interfaces (see
Figure 10, Page 12).
NOTICE!
You will find detailed information about the CAN and Ethernet networking of the fire panels in
the Networking Guide available for download at www.boschsecurity.com.
F.01U.258.926 | 3.0 | 2012.09
Function
Operating the networked system through virtual buttons and variable display windows
Standard entries
Indicating the operating status
2 switch settings, freely programmable, e.g. for switching between day/night mode or
connecting/disconnecting for local alarm signaling
Remote Keypad HW reset
Configuration
Address setting
Before mounting the housing, remove the operating unit. This prevents the touch screen
being damaged and facilitates installing the lower mounting screws.
Illustration
See Figure 2, Page 5, I
See Figure 2, Page 5, II
See Figure 2, Page 5, III
Connect the shield wires to the screw terminal (Figure 11, Page 13 (step 1).
Fasten the cables with cable ties (Figure 11, Page 13, step 1 to 4).
2 CAN interfaces (CAN1/CAN2) for networking
2 Ethernet interfaces (ETH1/ETH2) for networking
2 signal inputs (IN1/IN2)
1 USB and 1 RS232 interface
Mounting Instructions
See Figure 3, Page 6 to Figure 5, Page 8 (step 1 to 13) and
Figure 6, Page 9
See Figure 3, Page 6 to Figure 5, Page 8 (step 1 to 13) and
Figure 7, Page 10
See Figure 3, Page 6 to Figure 5, Page 8 (step 1 to 13) and
Figure 8, Page 11
FMR-5000-C
Bosch Sicherheitssysteme GmbH