Folding Work Table; Instruction Manual; Important Safety Instructions - Keter PRO Série Guide D'utilisation

FOLDING WORK
TABLE

Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

1. Do not load with more than 1000 lbs. (453 kg). Do not leave heavy loads on work surface for
extended periods of time.
2. Do not apply an unbalanced load which could cause the workbench to tip over.
3. Do not use the work centre as a stepladder or standing platform. Do not use the lower
platform as a step.
4. Do not store workbench outdoors or in a damp location.
5. Avoid applying excessive force when clamping with the supplied clamps.
6. Be sure that the legs are fully open and the centre support is in position and locked before
use.
7. When using a power tool with the workbench, follow the safety instructions in the tool's
instruction manual.
8. Do not mount or clamp power tools to any surface.
9. Always wear safety glasses when operating power tools.
10. Cutting or drilling into work surface may weaken supports, damaging tool or workbench.
11. Caution required when using high temperature tools (heat guns, torch, solder iron, etc.). May
damage work surface and reduce clamping capability.
12. Do not store flammable liquids on the workbench.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
WWW.KETER.COM
1