Technical Data; English - Milwaukee M18 ONEHCC Notice Originale

TECHNICAL DATA

Cable Cutter
Production code
Frequency band
Radio-frequency power
Battery voltage
Nominal force
Cutting range depends on material
ACSR: Aluminium-/Steel cable max.
Copper- / Aluminium-Cable max.
Other materials and their diameter are depending on the specific
jaws.
Weight according EPTA-Procedure 01/2014
(Li-Ion 2,0 Ah...9,0Ah Cu/Al / ACSR)
Deviating weights depend on the specific
jaws.
Recommended Ambient Operating
Temperature
Recommended battery types
Recommended charger
GB
Noise information
Measured values determined according to EN 62841. Typically, the
A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 75,6 dB (A)
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according
to EN 62841
Vibration emission value a
Uncertainty K=
WARNING!
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.

English

12
M18 ONEHCC
4675 45 01...
... 000001-999999
2402-2480 MHz
1.8 dBm
18 V
53 kN
22,5 mm
35 mm
3,7 kg... 4,3 kg
-18°C ... +50°C
M18B...
M12-18...
86,6 dB (A)
1,04 m/s
2
h
1,5 m/s
2
2
11
3
4 5
Device description
1 Hydraulic release button
2 Locking bolts
3 Cutting tools
4 Cutting jaws
5 Trigger
6 ONE KEY indicator
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
CABLE CUTTER SAFETY WARNINGS
Only personnel trained in electrotechnical applications may carry
out cutting and splitting of cables and cords with the aid of this
cable cutter.
To reduce the risk of explosions, electric shock and damage to
property and equipment, never cut live electrical cables. Tool is
NOT insulated.
Keep hands and loose items of clothing away from cutting tools
and other moving parts. There is a risk of serious injury, including
severing of limbs.
Use protective equipment.
The use of protective clothing is recommended, such as dust
mask, protective gloves, sturdy non-slip footwear, helmet and ear
defenders.
Always wear safety goggles when working with the cable cutter.
Prevent accidental starting of the cable cutter.
Never hold the cable cutter by the cutting jaws.
Before using, always check the cutting jaws for cracks and other
signs of wear.
Only use the cable cutter, removable battery and charger if they are
in perfect technical condition.
Have damage repared immediately by an authorised workshop.
Remove the battery pack before starting any work on the
appliance.
The cable cutter may only be used with a cutting tool inserted.
Remove any setting tools and wrenches before making the cut.
To avoid injury and damage, never immerse the tool, removable
battery or charger in liquid or allow liquid to penetrate them.
9
1
8
6
7
10
7 LED
8 Hanger
9 LED Remote cut indicators
10 Battery
11 Handle
Insulated gripping surface