Polaris GLACIER-II Manuel D'installation page 14

"GLACIER-II" PLOW FRAME
KIT PN 2878822
FRAME ASSEMBLY INSTRUCTIONS
NOTE: The parts described in steps 1 and 2 are included
in the Mount Plate Kit (PN 2877906, 2878835 or
2878824).
1. Install the
M6-1.0 X 40 mm
nylock nut (#C) as illustrated.
M6-1.0
2. Fasten the pull bar (#A) to the pivot using a
hex bolt (#D) and a
X 45 mm
3. Fasten the snow plow to the pivot using
hex bolts (#5),
M12-1.75 X 50 mm
(#1), and nylock nuts (#9).
(2) M12-1.75
NOTE: To allow blade to trip, do not overtighten.
4. Insert the
(2) 41 mm dia X 201 mm
into the snow plow upper holes and fasten the other
ends of the springs to the pivot using the
eyebolts (#23), the
X 60 mm
and the nylock nuts (#10).
(2) M8-1.25
7515212
A-7515212
hex bolt (#B) and screw the
M10-1.5
nylock nut (#E).
M10-1.5
(2)
flat washers
(4) M12
tension springs (#12)
(2) M8-1.25
flat washers (#2),
(2) M8
- 6 -
Imprimé en Chine / Printed in China