Polaris GLACIER-II Manuel D'installation page 12

"GLACIER-II" PLOW FRAME
KIT PN 2878822
OPERATION
To adjust the blade angle for plowing to the side, lock Blade in the UP position. Pull the Locking Arm forward and
pivot blade to the desired position. The Locking Arm will lock into place when the blade is at the correct angle. To
tip the top of the blade forward or back, turn the four position Adjustable Blade Stops to the desired position making
the Blade more or less aggressive.
The Blade is designed to trip when it hits a solid object or digs in too far. When the pressure is released the Blade
springs back into position. Blade Spring tension may be set stiffer by tightening the Locknuts on the bottom of the
Eyebolts. For less spring tension, loosen the Locknuts.
7515212
A-7515212
- 4 -
Imprimé en Chine / Printed in China