Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4

Installation

§ Disconnect the power supply:
Unplug the AC adapter from the wall socket (mains).
§ Turn the balance/scale on its side.
!
To avoid damaging the weighing system, do not
turn the balance/scale over so that it rests on the
weighing pan/load plate.
§ Push out the panel on the bottom of the
balance/scale.
§ Insert the interface.
§ Make sure the interface snaps into place.
§ Guide the cable through the channel/raceway.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Yadap-usb

Table des Matières