Table Des Matières; Intended Use - Sartorius YADAP-RS Mode D'emploi

Contents
3 Intended Use
Installation
4
7 Configuration
7 Parameter Settings (Menu Navigation)
8 Parameter Settings for the Interface
(Menu Overview)
9 Data Output
9 Printing a Data Record
10 Interface Port
10 Data Output Format
11 Data Input Format
12 Pin Assignment Chart

Intended Use

This data interface can be used to
connect a balance/scale to a computer
or to a optional printer.
You can connect a computer to
change, run and monitor balance/scale
functions and applications.
Features
- Type of interface: Serial interface
- Operating mode: Full duplex
- Standard: RS-232 or USB
- Transmission rates: 300, 600, 1200,
2400, 4800, 9600, and 19,200 baud
- Parity: odd, even, none
- Character format: start bit, 7/8-bit
ASCII, parity, 1 or 2 stop bits
- Handshake:
- 2-wire interface:
via software (XON/XOFF)
- 4-wire interface:
via hardware (CTS/DTR)
- Data output format of the
balance/scale: 22 characters
3