Setting The Clock - Sony Cyber-shot DSC-HX10 Mode D'emploi

Setting the clock

1
Press the ON/OFF (Power) button.
Date & Time setting is displayed when you turn on the camera for the first
time.
• It may take time for the power to turn on and allow operation.
2
Select a desired language.
3
Select a desired geographic location by following the
on-screen instructions, then press z on the control
wheel.
4
Set [Date & Time Format], [Daylight Savings] or
[Summer Time] and [Date & Time], then select [OK] t
[OK].
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
5
Follow the instructions on the screen.
• The battery pack will run out quickly when:
– [GPS setting] is set to [On] (DSC-HX10V only).
– [Disp. Resolution] is set to [High].
GB
16
ON/OFF (Power)
Power/Charge lamp (green)
Control wheel
Select items: v
Set the numeric value of date and
time: /
Set:
z
/ V / b / B