Tokai M038 Manuel D'utilisation page 28

SETTING THE CLOCK
1. With the unit powered OFF, press and hold the
Clock Set/Mem button until the system
entered the clock setting mode.
2. System will enter the 12/24 hour setting and
display will flash "24".
3. Press the TUN+/- buttons on the front of the
unit, or the Skip Rev/Fwd buttons on the
remote control to set the hour.
4. Press the Clock Set button again. The minutes
will begin flashing on the display.
5. Repeat Step 2 to set the minutes.
6. Press the Clock Set or Clock button on the
remote control again to finish setting the time.
SETTING THE SLEEP TIMER
1. With the unit powered ON, press the Sleep
button on the remote control. The display will
show the amount of time in minutes before the
timer goes off.
2. Press the Sleep button to select the amount of
time before the timer goes off : 120 minutes, 90,
60, 45, 30, 20, 10 or OFF.
3. Wait for the display to return to normal. "Sleep"
will be visible towards the bottom of the display
when the timer is ON.
4. To turn the Sleep Timer OFF, perform step 2 until
the display reads "OFF".
CLOCK AND ALARM
SETTING THE ALARM
CANCELLING/DEACTIVATING THE ALARM
28
1. With the unit powered off, press and hold the
Alarm button on the front of the unit or on the
remote. The hour will begin flashing on the
display.
2. Press the TUN+/- buttons on the front of the
unit, or the Skip Rev/Fwd buttons on the
remote to set the hour.
3. Press the Alarm button again. The minutes will
begin flashing on the display.
4. Repeat Step 2 to set the minutes.
5. Press the Alarm button again to set the alarm
type : the alarm type will begin flashing on the
display.
6. Repeat Step 2 to set the alarm type : Radio, CD,
USB or Buzzer.
7. Press the Alarm button again to finish setting
the alarm.
1. After the alarm has sounded, press the Alarm
button to cancel it.
2. Press and hold the Alarm button to turn it off
entirely. The alarm indicator on the display will
disappear.