Tokai M038 Manuel D'utilisation page 24

CONNECTING THE SPEAKER
1. Connect the included speakers to the SPEAKER OUTPUT on the back of the music system. The speaker to
the right side of the music system should be plugged into the output labeled "R". The left speaker should
be plugged into the output labeled "L".
POWER SUPPLY
2. Check if the power voltage, as shown on the type plate located on the back of the set, corresponds to
your local AC power supply. Connect the power cord to a standard wall outlet. The power supply is now
connected and ready for use.
BATTERY BACKUP
3. Requires 2 AAA-size batteries (not included).
The battery backup is intended for short power outages only.
The unit's primary functions cannot run of the battery backup alone.
REMOTE CONTROL
4. Requires 1 x CR2025 button cell battery (included).
SETUP
24