Domo DO7283S Mode D'emploi page 47

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
6. Close the dust bag compartment and push the lid
back into place. The spring on the dust bag frame will
make sure that the opening of the dust bag is pushed
into the right position when closing the lid.
Cleaning the air filter or HEPA filter
The exhaust air filter or HEPA filter cleans the air a final
time before it leaves the vacuum cleaner. This filter and the grid that covers the filter
should be cleaned regularly. You can clean the filter as follows:
1. Turn off and unplug the vacuum cleaner. Always pull
the plug itself, never pull the cord.
2. Open the grid that covers the filter by pushing it
left at the clip. The filter is visible when the grid is
removed.
3. Take out the filter.
4. Rinse the filter under cold water and let it air dry
completely.
5. Put the filter back into place or replace the filter by a
new one. Make sure that the filter is placed properly.
6. Seal with the grid. Make sure that the grid clicks into
place.
CAUTION:
Always use the vacuum cleaner with the filters in place. If not, this can lead to
loss of power or damage to the motor.
Remove the plug from the socket before cleaning the filters.
Do not place the filters in the dishwasher.
Do not use a hair dryer to dry the filters.
47
DO7283S-DO7284S
4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Do7284s

Table des Matières